Nearly ABS spec irons

Equipment Buy, Sell, Trade the good stuff!
1

For sale, a set of Spalding Synchro Dyn irons, 3-9.

I put a lot of work to align these with ABS specs. Lie angles and dead weights align with ABS specs. They are 2* weaker than ABS specs since there’s no PW. A bit heavy for ABS but that’s because of the relatively new grips that are oversized and weigh a bit extra.

What’s not ABS? The short irons have a tiny offset remaining, but the long irons look spot on. Also, the 4 iron has a less stiff shaft and weighs a bit less. If you ask nicely, I can monkey around with the short irons more and try to work the offset out. Asking $200.

1000001439
10000014391350×700 70.8 KB

2

1000001425
10000014251920×1442 515 KB

1000001438
10000014381920×1941 781 KB

1000001427
10000014271920×1442 603 KB

1000001426
10000014261920×1442 580 KB

3

Clubs shown: 3, 5, 7, and 9.

1000001435
10000014351920×2927 1.57 MB

1000001436
10000014361920×3081 1.73 MB

1000001437
10000014371920×3016 1.62 MB

1000001434
10000014341920×2977 1.62 MB

4

As far as the heads themselves, they have long hosels and longer than average blade length for the era. Easy to hit high fades with.

They’re stainless, so don’t need a protective finish. They bent easier than my dynapower irons and are plenty soft.

5

Price drop to $170.

6

Hi there , how flat are they. Do you do the work on them.Thank you.

7

They’re 6* flat. Detailed specs are in the first post. I do the work on them and can adjust lofts and lies to the buyer’s specs.

8

Can you do a set of Hogan Bounce Sole 6–pw too if i buy them from you.All 6 degrees flat. 6,32-58 7,36-56 8,40-57 9, 44-57 pw, 50-58.